Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Working or machining with chip formation. Abrasive working. Hammers and presses - 621.9

Scientific articles

In section "Working or machining with chip formation. Abrasive working. Hammers and presses"
Application of aerostatic legs at perfecting the sawing machine tools
Prokofyev G.F., Derbin M.V., Tyurin A.M.
Kinematics of honing methods
Khanov А.М., Muratov K.R., Gashev E.A., Pepelyshev A.V.
Features of electroerosive machining of small dimensions details
Ablyaz T.R., Khanov А.М., Sevastyanov V.V.
The kinematic analysis of methods of screw surfaces machining
Brusov S.I., Markin S.A., Tarapanov A.S.
Combinatorial method of giving the greasing cooling liquid at flat grinding by circle periphery
Vasilenko Yu.V., Tyuhta K.S., Tyuhta A.V.
Application of the cooled ionized air at high speed milling
Esov V.B., Klimochkin K.O., Muratov K.R., Hurmatullin O.G.
Modeling and calculation of the surface roughness in turning cutters with inlays of composites
Kudryashov E.A., Yatsun E.I., Pavlov E.V., Remnev A.I., Shvets S.V.
Increasing the efficiency of raster finishing by control of downforce effort in the process of handling
Muratov K.R., Pepelyshev A.V., Gashev E.A.
Research the stability of electroerosive processing with use the criteria of non-linear dynamics
Burdasov Evgeniy, Sarilov Mikhail
Increase of effectiveness of pipes frictional cutting by disk saws with modified profile of tooth
Mikhaylov Stanislav, Medyantsev Andrey
Technological methods of increasing the accuracy of geometrical form of processed apertures at honing
Muratov Karim, Gashev Evgeniy
Detonation technologies of balancing and hardening the abrasive disks
Nenashev Maxim, Demoretskiy Dmitriy, Ibatullin Ildar, Ganigin Sergey, Zhuravlyov Andrey, Grishin Roman, Dyakonov Alexander, Voronin Vladimir
Research the properties of brass electrode-tool at processing of titanium
Ogleznev Nikita, Ablyaz Timur, Khanov Almaz
Milling machine with collateral kinematics
Panov Sergey, Gustova Olga, Mazein Petr
Research of influence of the external magnetic field on process of electroerosive processing
Sarilov Mikhail, Kovbasyuk Arnold
Research the dynamics of tools spindle units on the basis of mathematical modeling
Khanov Almaz, Kobityanskiy Aleksey, Shafranov Aleksey
Honing module with the mechanism of radial giving the honing stones
Khanov Almaz, Muratov Karim, Gashev Evgeniy
Technologies of alloy steel building-up welding on the basis from carbon steel
Dolgovechniy Aleksey, Demidova Luiza, Morozov Evgeniy
Finishing electroerosive processing of titanic and aluminium alloys
Linyov Alexander, Sarilov Mikhail
Laser build-up welding on gas turbine engines blades
Morozov Evgeniy, Dolgovechniy Aleksey, Khanov Almaz
Management and controlling of complex machine building manufacturing on the base of CALS technologies
Grigoriev Sergey, Kutin Andrey
Simulation of forming operations surface roughness on surface grinding
Gismetulin Albert, Sidorenko Oksana
The problems of air flows generated by diamond cutting wheel
Kobelev Stanislav, Danilov George
Research of influence of obtusion of cutting edges of the cutting tool on accuracy of a cut-down contour of sheet details at raskry pressure of the elastic environment
Fedotova Irina, Rizhakov Stanislav, Dementev Sergey, Fedotov Yuri, Gromova Ekaterina
Influence of the interlayer clearenc between preforms on process stability of packaged electroerosive machining
Ablyaz Timur, Khanov Almaz, Sevastiyanov Valeriy
Comparative researches of honing methods
Muratov Karim, Gashev Evgeniy
Research the process of monocrystal grinding on machine tools with various kinematics
Muratov Ravil, Muratov Karim, Gashev Evgeniy
Mathematical modeling the process of automated system of oil greasing in conditions of measurement the level of mill loading
Sibirtseva Nataliya, Potapenko Anatoliy, Soldatenkov Aleksey, Semiletov Nikolay
Receiving the precision titanic tooth crowns by electroerosive method
Sirotenko Lyudmila, Ablyaz Timur, Ogleznev Nikita
The analysis of signals vibration acceleration of bearings of the motor-spindle
Gasparov Eric, Denisenko Aleksandr, Gasparova Lana
Case preparation with the complex of hydrojacks as object of management
Remneva Oksana, Samokhina Hatalia, Gorskov Boris
Process measuring of feather compressor blade of GTE based on shank trapezoidal type controlled on CMM modeling
Bolotov Michael, Pechenin Vadim, Cheveleva Anastasia
Modeling the process of measurement the case details by coordinate and measuring machine
Ablyaz Timur
Macrorelief solid-state modeling of different curvature cylindrical surfaces
Abulkhanov Stanislav, Voronin Valeriy, Goryainov Dmitriy, Denisenko Alexander, Papshev Valeriy, Sorokin Igor, Shaposhnikov Sergey
Research the detonation hardening of grinding circles
Voronin Valeriy, Borisov Vitaliy, Zhuravlyov Andrey, Ibatullin Ildar, Nechaev Iliya
Files with firm coverings
Gubareva Yuliya, Nenashev Maxim, Ibatullin Ildar
The device for detail autorotation on machine-tools with raster kinematics
Muratov Ravil, Muratov Karim, Gashev Evgeniy
Methodology of the grinding modes choice
Nenashev Maxim, Borisov Vitaliy, Voronin Valeriy, Zhuravlyov Andrey, Ibatullin Ildar
A grinder mathematical modeling taking into account the interaction of elastic, thermal subsystems and working
Nikitin Sergey
Influence of electroerosive processing modes on accuracy of receiving holes
Ogleznev Nikita, Ablyaz Timur
QR code for installing the SciUp app Point your camera and download the free app SciUp