Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Recycling in investment casting
Zaslavskaya Olga Mikhaylovna, Sabirova Lilia Nailovna, Koltso Dmitry Alexandrovich
Resource-saving principles in the foundry industry
Erdakov Ivan Nikolaevich
The method of temperature measurement in studying the character of solidification of a casting
Erdakov Ivan Nikolaevich, Novokreshchenov Viktor Vladimirovich, Salamatov Igor Vladimirovich, Sabirova Lilia Nailovna
Increasing of the bearing capacity of welded cylindrical shells with longitudinal soft seams
Shakhmatov Denis Mikhailovich, Shakhmatov Mikhail Vasilievich
The risk evaluation of angle concentrators in welded joints of the brittle materials
Shakhmatov Denis Mikhailovich, Shakhmatov Mikhail Vasilievich
The modern approach to the development of technological parameters of welding in the production of large-diameter pipes
Ulanov Alexey Mikhailovich, Ivanov Mikhail Alexandrovich
Development of the technology of multiarc welding of pipe steels
Ulanov Alexey Mikhailovich, Ivanov Mikhail Alexandrovich
To the question of the influence of welding heat on cooling rate of the weld seam metal
Ivanov Mikhail Alexandrovich, Ulanov Alexey Mikhailovich, Rode Vladimir Vladimirovich, Danilkin Pavel Alexeevich
Analysis of different types of welding wire for welding of steel pipes having wall thickness greater than 25.0 mm
Yakovlev Dmitriy Sergeevich
Use of a system of varied coefficients at the calculation of the calibration of technological tool for cold-rolling tube mills
Yakovleva Ksenia Yurievna
Process of mould filling during centrifugal casting of titanium-aluminum intermetallic alloys
Kulakov Boris Alexeevich, Dubrovin Vitaly Konstantinovich, Chesnokov Andrey Anatolievich, Karpinsky Andrey Vladimirovich
Alumina moulds on alumina-boron-phosphate concentrate in investment casting
Znamensky Leonid Gennadievich, Vertsyukh Sergey Sergeevich, Varlamov Alexey Sergeevich, Sudarikov Mikhail Viktorovich
Bulk structure formation in quasi preliminary alloys
Cheberyak Oleg Ivanovich, Sivkov Vladimir Lavrentievich, Lyubimtsev Anton Alexandrovich, Chuvagin Nikolay Fedorovich, Titov Andrey Vyacheslavovich
Supercooled austenite decomposition kinetics of experimental economically alloyed tool steels during continuous cooling
Antonov Sergey Mikhailovich, Akhmedyanov Alexander Maratovich, Gaslenko Mikhail Igorevich, Rushchits Sergey Vadimovich, Sokolov Sergey Olegovich, Krylova Svetlana Evgenievna, Yakunina Olga Alexandrovna
Effect of high-temperature thermomechanical treatment on the properties of a high-chromium steel
Smirnov Mikhail Anatolievich, Pyshmintsev Igor Yurievich, Laev Konstantin Anatolievich, Akhmedyanov Alexander Maratovich
Investigation of hot deformation behavior of 20KH13 steel through compression tests
Akhmedyanov Alexander Maratovich, Antonov Sergey Mikhailovich, Rushchits Sergey Vadimovich
Estimation of effectiveness of continuous deformation nanostructuring of steel wire
Korchunov Aleksey Georgievich, Polyakova Marina Andreevna, Gulin Aleksandr Evgenevich
Heat treatment of consumable pattern castings
Koryagin Yuriy Dmitrievich, Mirzaev Dzhalal Aminulovich, Kulikov Andrey Anatolevich
Theoretical approach to the calculation of three-arc submerged arc welding mode of butt joints of rail transport trolley parts
Ivanov Mikhail Aleksandrovich, Ulanov Aleksey Mikhaylovich, Bezgans Yuriy Viktorovich
Research of kinematics of lever mechanisms of roll drive of step-by-step rolling mills
Koval Grigoriy Ivanovich, Karimova Tatyana Grigorevna
Research of pipe sizing process on three-roll screw rolling mill TPA “140” at JSC “Sinarsky pipe plant”
Kuryatnikov Andrey Vasilevich, Korol Aleksey Valentinovich, Korsakov Andrey Aleksandrovich
Research of the drawing technology of rectangular profiles in the roller die with shift by roller couples
Nagornov Valeriy Sergeevich, Kareva Nadezhda Titovna, Dmitrieva Svetlana Mikhaylovna, Pusep Stanislav Igorevich, Boriskova Natalya Petrovna, Titova Marina Sergeevna
Evaluation of plastic properties and method of determining of the flow index of sand-clay mixtures
Smolko Vitaliy Anatolevich, Antoshkina Elizaveta Grigorevna
Production of high quality cast parts from aluminium alloys
Novokreshchenov Viktor Vladimirovich
Flux-cored welding pipes made from high-strength steels
Yakovlev Dmitriy Sergeevich, Shakhmatov Mikhail Vasilevich
Evaluation of materials for ceramic crucibles for melting reactive metals and alloys
Kulakov Boris Alekseevich, Dubrovin Vitaliy Konstantinovich, Karpinskiy Andrey Vladimirovich, Chesnokov Andrey Anatolevich
Problems for good slab ingot at CCM No. 2 of JSC «Ural steel»
Shevchenko Evgeniy Aleksandrovich, Shapovalov Aleksey Nikolaevich
Analysis of hydrodynamic and thermal processes in shaped casting “valve box” production
Erdakov Ivan Nikolaevich
Investigation of the process of rolling the high-strip with small deformation
Shkuratov E.A., Vydrin A.V.
On the question of working capacity of a fillet weld of crane girders
Salimov R.D., Ivanov M.A., Shcherbakov I.A.
Impact of the tundish metal wiring geometry and casting process parameters on the running of billet continuous casting machine
Botnikov S.A.
Prevention of cracks in the castings by taking into account dilatation during heat treatment
Ivanov M.A., Shvetsov V.I.
On controlling the carbon phase of the cast iron for glass-molds produced on the basis of CHS5SH alloy
Leushin I.O., Chistyakov D.G.
Thermophysical modeling of application-tube coating by centrifugal SHS
Sadykov R.A., Potapov V.I., Ermolenko A.A., Trofimov E.A.
Working capacity of welded sidewalls of a tram-car section
Zagrebelnyy S.S., Shakirov A.A., Ulanov A.M., Ivanov M.A.
Study of dynamic changes of the pipe wall thickness in the reduction process
Yakovleva K.Yu., Barichko B.V., Kuznetsov V.N.
Electrophysical methods of activation of clay minerals aqueous suspensions
Smolko V.A., Antoshkina E.G.
Resource saving moulding processes for investment casting
Znamenskii L.G., Varlamov A.S., Vertsyukh S.S.
Some ways of the evaluation method efficiency increase of crack resistance of large diameter welded pipes for natural gas transmission
Pashkov Yu.I., Ivanov M.A.
Analysis of working conditions of cast materials operating at 950-1000 °C and requirements for stamping in isothermal conditions
Demenok O.B., Ganeev A.A., Demenok A.O., Kulakov B.A.
QR code for installing the SciUp app Point your camera and download the free app SciUp