Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Study of the effect of annealing on structure and properties of thin bimetallic strip brass - aluminium - brass
Kareva N.T., Pellenen A.P., Khabibullin A.A., Galimov D.M.
Technological complex for the production of solid and hollow forgings being direct and alternating along the cross section length of special metals and alloys
Zakarlyukin S.I., Zakarlyukina E.A., Koval G.I.
Determination of geometrical parameters of profiling tools in manufacturing pipes with internal screw threads by pressing
Kosmatskii Ya.I., Perevozchikov D.V.
Clinker based pouring mould mixture
Dubrovin V.K., Tesalova O.Yu., Stepanov V.A.
Calculation of the welding arc temperature in multiarc welding
Ulanov A.M., Ivanov M.A.
Performance evaluation of welded T-junctions at reduction of completed lengths
Voyder K.A., Glukhov M.G., Esiev T.S., Yaroslavtsev S.I.
Preventing cracks when casting steel slag ladles
Ivanov M.A., Shvetsov V.I.
Features of copper alloys cast bars production
Mysik R.K., Brusnitsyn S.V., Sulitsin A.V., Ivkin M.O., Karpinskiy A.V.
Effect of recycled moulding mixture on the quality of castings
Dubrovin V.K., Kulakov B.A., Karpinskiy A.V., Dubrovina A.V.
Research of the influence of the number of repairs of a welding joint on its mechanical properties
Tingaev A.K., Elsukov E.I.
Effect of pulse-arc MIG welding on the mechanical properties of welded seams made with austenitic-ferritic welding wires
Yaroslavtsev S.I., Khudyakov A.O.
Experimental study of inertial pressing of pipes
Kosmatskii Ya.I., Fokin N.V.
Kinetics of swelling of bentonite clay of Zyryanovka deposit
Smolko V.A., Antoshkina E.G.
Analysis of the technological peculiarities for flux-cored welding
Yakovlev D.S.
Modelling of temperature distribution during metal-ceramic pipe production using a centrifugal SHS method
Sadykov R.A., Potapov V.I., Lyubimova A.A., Trofimov E.A.
Effect of base metal composition on toughness in a heat-affected zone of large diameter welded linepipes
Khudyakov A.O.
Development of calculation methodology and creation of elements of metallurgical units - intermediate CCM ladles
Nefedov A.V., Tochilkin V.V.
Evaluation of the pipe crack resistance by impact toughness and DWTT test
Pashkov Yu.I., Ivanov M.A.
Estimated effect of heat input on formation of cold cracks in heat-affected zone of weld
Rybin V.S., Kvashnin V.D.
Distribution of strains during metal drawing in shifted roller pairs
Barichko B.V., Vydrin A.V., Yakovleva K.Yu., Barichko V.S.
Defining of end crops of pipes produced at pipe rolling plant with continuous PQF, FQM mills
Chernykh I.N., Struin D.O., Shkuratov E.A.
Estimation of the influence of various factors on the quality of hot-rolled pipes
Khramkov E.V., Barichko B.V., Kochkin A.S.
Abrasive and impact-abrasive wear resistance of solid weld deposits
Nefedev S.P., Dema R.R., Kotenko D.A.
The strength of butt joints weakened by soft interlayer under bending load
Aymetov S.F., Aymetov F.G.
Influence of ultrasonic treatment on the viscosity of aqueous-clay suspensions for sand-clay mixtures
Antoshkina E.G., Smolko V.A.
Drop weight impact testing of samples for evaluating the fracture toughness of welded gas and oil pipes
Pashkov Yu.I., Bezgans Yu.V.
Processes of formation and preventing burns on steel castings
Shvetsov V.I., Ivanov M.A., Kulakov B.A., Karkarin A.M.
Mathematical modeling of the combined process of casting and lateral pressing
Kosmatskii Ya.I., Fokin N.V.
Development of resource-saving technologies of welding heat-resistant chromium steels
Gabbasov D.F., Khalimov A.A., Makarov L.V., Khalimov A.G.
Using modern software for welding mode calculations
Rybin V.S., Kvashnin V.D.
Improving the method of calculation of sizes of corner cut seams
Zaytsev N.L.
Calculation of four arc welding mode for large diameter pipes
Ulanov A.M., Ivanov M.A.
Welding for producing ring blanks of heat-resistant nickel alloys
Eremin E.N., Filippov Yu.O., Borodikhin S.A., Ilyasov R.I., Gubina A.S.
Use of plasma hardening for circular knives
Nefedev S.P., Dema R.R., Kotenko D.A.
Investigation of thermal stability of die steel deposited with N13M5KH4FSTYUR flux-cored wire
Losev A.S., Eremin E.N., Matalasova A.E., Gurzhiy A.S., Sumleninov V.K.
Cored Fe-Cr-Al wires for arc metallization of heat-resistant coatings
Korobov Yu.S., Filippov M.A., Tabatchikov A.S., Nevezhin S.V., Verkhorubov V.S., Rimer G.A.
The relationship of average and partial coefficients of element transition in manual arc welding
Votinova E.B., Shalimov M.P.
Electrodes for manual arc welding in oil and gas complex
Zvereva I.N., Kartunov A.D., Platov S.I., Mikhaylitsyn S.V., Sheksheev M.A.
Maintenance of fracture toughness of welded joints of X80 large diameter thick-walled pipes
Khudyakov A.O., Danilkin P.A.
Method of determining a hem edge radius in the production of large diameter pipes
Zvonarev D.Yu.
QR code for installing the SciUp app Point your camera and download the free app SciUp