Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Applications of radial forging machine SKK-14 for hot and cold forging of pipes
Zakarlyukin S.I., Koval G.I.
Technological formability of titanic alloys
Kraynov V.I., Kropachev V.S.
Research and training simulator of shape rolling process
Dubinskiy F.S., Sosedkova M.A., Maltsev P.A.
Development of the theory of metal forming processes (scientific review). Part 1
Gun G.S.
Plastic flow during longitudinal low temperature rolling
Nagornov V.S.
Computer modeling of piercing in a screw mill with barrel-rolling rolls
Korol A.V., Vydrin A.V., Shirokov V.V.
Axial force in helical rolling
Naizabekov A.B., Arbuz A.S., Talmazan V.A.
The research methodology of continuous press-casting of metals
Gorokhov Yu.V., Sherkunov V.G., Konstantinov I.L.
Study of the effect of kinematic tension coefficient on tube forming in groove taper during lengthwise rolling on a stub mandrel
Bogatov A.A., Pavlov D.A., Pavlova E.A.
Vacuum-ultrasonic treatment of self-hardening slurry in art casting
Znamenskii L.G., Ivochkina O.V., Varlamov A.S.
Development of the theory of metal forming processes (scientific review). Part 2
Gun G.S.
Experimental determination of the friction forces in the deformation zone at roller forming of large-diameter pipes
Ilichev V.G., Zalavin Ya.E.
Current level of research of the process of extrusion of pipes with additional rotation of press needles
Kosmatskii Ya.I., Fokin N.V., Perevozchikov D.V.
Investigation of the influence of ovality of finishing caliber of three-roll continuous mandrel FQM mill on rolled product forming
Shkuratov E.A., Struin D.O., Chernykh I.N., Sarafanova O.E., Bushin R.O., Noskov K.A., Panasenko O.A.
Research of physical properties of the wicks obtained by sintering the dispersed copper powder in the construction of thermosyphons and heat pipes
Shestakov A.L., Karipov R.S., Galimov D.M., Karipov D.R.
The choice of water-based binder for shell molds of the investment casting of titanium alloys
Mukhamadeev I.R., Demenok O.B., Ganeev A.A., Pavlinich S.P., Alikin P.V.
Influence of shape and size of the tip of the piercing mill mandrel on the formation of internal defects in shells and application of continuously cast billets for pipe diameters of less than 121 mm
Sherkunov V.G., Korsakov A.A.
Development of technology of manufacturing pipes with an inner diameter of 6-12 mm
Yakovleva K.Yu., Barichko B.V., Kuznetsov V.N., Nikonov M.S., Demina Yu.D.
On the issue of designing roller dies with staggered pairs of rollers
Khramkov E.V., Shter A.A., Yakovleva K.Yu.
Estimation of effectiveness of heat treatment modes for a welded joint by Sysweld software
Zagrebelnyy S.S., Koryagin Yu.D., Taran S.M.
Experimental research of the quality of plating strip trimming during cladding the strips with cold rolling
Pellenen A.P., Khabibullin A.A.
Estimated analytical expressions of thermomechanical parameters of molds and cores made of synthetic mixtures on account of anharmonicity
Smolko V.A., Antoshkina E.G.
Refining and modification of alloys by nanostructured recycling materials
Znamenskii L.G., Ivochkina O.V., Rechkalov I.V.
Formation of fragmented structure during warm deformation of low-carbon martensite steel
Tabatchikova T.I., Yakovleva I.L., Delgado Reina S.Yu., Plokhikh A.I., Efimova E.D.
Effects of heat treatment on the structure of BrNKHK bronze
Kareva N.T., Koryagin Yu.D.
Research of annealing bimetallic brass-aluminium strips in a draw furnace
Kareva N.T., Khabibullin A.A., Pellenen A.P.
Theoretical basis of the study of the workpiece deformation process without changing shape and size
Leshchev I.V., Bogatov A.A.
Investigation of the method of the accuracy increase of hot-rolled pipes under expansion
Bogatov A.A., Salikhyanov D.R.
Calibration of hem rolls in the production of roller forming longitudinal welded pipes
Ilichev V.G.
Analysis of wear-out behavior of MPM mill mandrels and methods of extension of their service life
Mishin S.N., Sherkunov V.G., Alyushkaev E.A., Struin D.O.
Tool stability under cold stamping of rod parts and hardware
Belkov E.G.
Rheology of graphitoplastic composite materials
Samodurova M.N., Barkov L.A., Latfulina Yu.S., Sozykin V.P.
Technological residual stresses after processing of metals by pressure
Kolmogorov G.L., Kuznetsova E.V.
Effect of distribution of non-metallic inclusions on wire damage in the process of drawing
Baryshnikov M.P., Chukin M.V., Boyko A.B.
The analysis of the impact of the new combined process “equal channel angular pressing - drawing” on the microstructure and properties of deformed copper wire
Lezhnev S.N.
Forward slip in rail profile rolling in universal caliber
Shvarts D.L., Shilov V.A.
Calculation of roll calibration of rolling-forging mills using the rolling pattern “smooth drum - circle”
Koval G.I., Karimova T.G.
Displacement and deformation during tube billet extrusion
Loginov Yu.N., Kostousova N.F.
Development of high-deformability line pipes
Pyshmintsev I.Yu., Struin A.O., Gervasev A.M., Struina E.R., Khudyakov A.O., Mikurov V.V., Stekanov P.A., Mozgovoy A.V.
Kinematics of the deformation zone in plugless rolling of oil pipes
Vydrin A.V., Khramkov E.V., Bunyashin M.V.
QR code for installing the SciUp app Point your camera and download the free app SciUp