Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Microstructure-based computer simulation of pearlitic steel wire drawing
Konstantinov D.V., Korchunov A.G., Shiryaev O.P., Zaytseva M.V.
High velocity compaction of carbon compositions
Samodurova M.N., Barkov L.A., Latfulina Yu.S.
Modelling of technological processes at the piercing press of a pipe pressing line
Rakhmanov S.R.
Numerical methods for calculations of billet feed halfpitch in the process of piercing on cross rolling mill
Perevozchikov D.V., Vasyuchkova K.V.
Controlling of shear deformation and its role in forming a stress-strain state
Sudakov N.V.
Evaluation of the determining parameters in the physical modeling of the coefficient of friction in the processes of metal forming
Vydrin A.V., Yakovleva K.Yu., Korol A.V., Golyshev A.S., Pashnina E.Yu.
Investigation of boundary conditions on the contact surface when drawing on free floating-plug
Vydrin A.V., Yakovleva K.Yu.
Researching of the influence of granulometric composition of glass-lubricants on the process of pressing pipes of steel 20
Kuznetcov V.I., Vydrin A.V., Korol A.V., Pashnina E.Yu., Zhukov A.S., Zubkov A.M.
Study on the deformation ability billets of titanium alloy grade PT-1M
Kosmatskiy Ya.I., Fokin N.V., Filyaeva E.A., Barichko B.V.
Research of macro- and micromechanics of steel deformation during drawing by multiscale computer simulation
Konstantinov D.V., Korchunov A.G., Shiryaev O.P., Kuznetsova A.S., Emaleeva D.G.
The classification of silicocalcium-barium alloys and their application to steel ladle processing
Belov B.F., Babanin A.Ya., Belousov V.V., Ryabchikov I.V., Golubtsov V.A.
Estimate of possibilities applying billet calling-dawing for decreasing in homogeneity deformation by high of deformation zone
Perevozchikov D.V., Radionova L.V.
Consolidation model of powder magnetic materials
Barkov L.A., Samodurova M.N., Latfulina Yu.S.
Analysis of the crack resistance of the Tekken-specimen
Ivanov M.A., Alruhaimi A.G.
Thermostating of a continuous-cast ingot in a continuous casting machine to provide direct rolling
Demidenko L.L.
Calculation of crack resistance of steel 20HL
Ivanov M.A.
Development of pipe rolling technology for continuous rolling mill with retained mandrel
Struin D.O., Vydrin A.V., Sherkunov V.G., Shkuratov E.A., Chernyh I.N., Sarafanova O.E., Mishin S.N.
Expansion of technological possibilities of the sediment process in application rings by meaning of contact friction conditions
Smyrnykh A.V., Strugov S.S., Ivanov V.A., Tarkalenko M.D.
Thermal cycles and peculiarities of decomposition of austenite in laser-hybrid welding of steels of strength class K52 and K60
Romantsov A.I., Fedorov M.A., Ivanov M.A., Lodkov D.G.
Resource-saving technology of reduction of hot-pressed pipes
Vydrin Alexander Vladimirovich, Kosmatsky Yaroslav Igorevich, Barichko Boris Vladimirovich, Voskhodov Valery Borisovich
Estimation of porosity influence on steel plate strained state
Erdakov I.N.
Physical modeling in the analysis of structural steels weldability
Sychkov A.B., Emelyushin A.N., Platov S.I., Mikhaylitsyn S.V., Terentev D.V., Sheksheev M.A.
Analysis of influence of billet torsion on formation of surface defects
Perevozchikov D.V., Eremin V.N., Krutov N.K.
Synthesis of control systems of continuous rolling mills with multirolled calibers
Selivanov I.A., Petuhova O.I., Suzdalev I.V.
Research of position of rotor interlinkage vector at vector-pulse start
Baskov Sergey Nikolaevich, Konkov Aleksandr Sergeevich, Cherkas Tatyana Viktorovna, Litsin Konstantin Vladimirovich
Vector-pulse control principle of AC motors
Baskov S.N., Litsin K.V.
Enhancing the control system of payoff machine electric drive in the steel-reinforcement-producing rolling mill
Safin I.R., Lukyanov S.I., Logunova O.S., Bodrov E.E.
Electric drives of the frequency converter-two-speed asynchronous motor system with switching structures
Khramshina E.A.
The diagnostics of single-phase capacitor induction motors by the level of external magnetic field, with allowance for technological and operational factors
Karandaev Alexander Sergeevich, Hramshin Vadim Rifhatovich, Galkin Vitaly Vladimirovich, Gostev Anatoly Nikolaevich
Stability loss of the homogeneous core at longitudinal impact on the core, interacting with the hard barrier
Bityurin Anatoly Aleksandrovich
Change of parameters of stress relaxation of aluminum A 85 under influence of electrical potential at various temperatures
Nevsky Sergey Andreevich, Konovalov Sergey Valerievich, Gromov Victor Evgenievich
Analysis of carbon dissolution in titanium under electron beam treatment
Gromov Viktor Evgenievich, Raykov Sergey Valentinovich, Sherstobitov Sergey Aleksandrovich, Ivanov Yury Fedorovich, Khaimzon Boris Bernardovich, Konovalov S.V.
Elaboration of atomic model for ab initio calculation of the ferrite / cementite interface
Verkhovykh Anastasia Vladimirovna, Okishev Konstantin Yurevich, Mirzoev Aleksandr Aminulaevich, Mirzaev Dzhalal Aminulovich
Technique for forecasting the operating life of coil tubing on the basis of laboratory and bench tests
Poroshin V.B., Buksbaum V.B., Druzhinin P.S.
Analysis of parallelization efficiency of the ANSYS Multiphysics solvers in simulation of linear friction welding
Bikmeev A.T., Gazizov R.K., Ivanov V.Yu., Kasatkin A.A., Latysh V.V., Lukashchuk S.Yu., Nasibullayev I.Sh., Yulmuhametov K.R., Yamileva A.M.
Optimization of nozzle layout in continuous casting machine
Safonov D.S., Logunova O.S., Chistiakov D.V.
Mechanisms for technological potential management at mechanic engineering enterprises
Dubrovina N.A., Radchenko A.P.
Evaluation of deformations in corrosion thin walled pipes at cold bending with rolling
Khaliulin Ye.V., Kozlov A.V.
Continuous temperature control of liquid steel in technological units of metallurgical production
Parsunkin B.N., Andreev S.M., Bondareva A.R., Akhmetov U.B.
Selection of rational compositions of mould flux for slab curve continuous casting machine
Shevchenko E.A., Ganin D.R., Litsin K.V.
QR code for installing the SciUp app Point your camera and download the free app SciUp