Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Analysis of temperature conditions of the process of pipe ends upsetting
Erpalov M.V., Bogatov A.A.
Innovative technologies and methods of hardening dies for pressing hard-composite powder materials
Samodurova M.N., Serebryakov I.S.
Beveling selection for filled welds with constructive faulty fusion
Zaytsev N.L., Ilin I.A.
Evaluation of the rolls wear of the finished group at the rolling mill CWRM-1700 by the JSC “ArselorMittal Temirtau”
Krivtsova O.N., Sherkunov V.G., Tolkushkin A.O., Nasonov A.I.
Study of residual stress fields in thin-walled tubes of stainless steel after drawing
Shimov G.V., Serebryakov An.V., Serebryakov Al.V., Rosenbaum M.A.
Research of temperature change of the roll after dumping from the stand
Strizhenko A.O., Astakhov A.A., Mazur I.P.
The influence of the melting regime on oxygen deposition from powders of naturally alloyed iron
Baryshev E.E., Tyagunov G.V.
A comprehensive study of the process of severe plastic deformation of aluminum alloy
Semashko M.Yu., Chigintsev P.A.
Analysis of stress-strain state in rough continuous rolling of electrical copper
Loginov Yu.N., Postylyakov A.Yu.
Determination of setting parameters of screw insertion on two-roll mills
Vydrin A.V., Korol A.V.
Design of the working tool of the screw rolling roughing mill for obtaining the wavy profile of the side surface of tube stock on the basis of computer simulation
Zvonarev D.Yu., Mikhalkin D.V.
Determination of contact pressure during double-t section rolling in a universal beam groove
Shvarts D.L., Nepryakhin S.O., Shilov V.A.
Development of scientific bases and optimization of technological modes of a new method of drawing cast ingots
Bogatov A.A., Nukhov D.Sh.
Evaluation of anticorrosive properties of welded junctions of pipes and profiles made of a galvanized strip on a continuous electric-weld pipe mill
Varnak A.G., Varnak O.V., Churikova T.N.
Investigation of cold rolling parameters of ultrafine grained titanium
Shumeyko V.P., Goryachev E.A.
Assessment of possibility to increase the accuracy of the geometric dimensions of pipes by combining the processes of side extrusion and reduction
Alushkaev E.A., Kosmatskii Ya.I., Shumeyko V.P.
Properties of tungsten wire in powder metallurgical processing with ultrafine powder
Barkov L.A., Samodurova M.N., Mymrin S.A., Latfulina Yu.S.
Repair and restoration of crystallizers of continuous casting machines
Vlasov A.E.
Calculation of physical-chemical interaction of titanium alloys with the materials of the mold
Ganeev A.A., Demenok A.O., Bakerin S.V., Kulakov B.A., Mukhamadeev I.R., Garipov A.R.
An indicator of working capacity of casting molds and cores made of synthetic sand mixtures with account of physical parameters
Smolko V.A., Antoshkina E.G.
Development of heat treatment technology of centrifugally cast rolls with working layer of chromium-nickel-molybdenum cast iron
Zhizhkina N.A., Medvedev A.N.
Analysis of efficiency criteria for evaluation of slab widthwise reduction
Shitov M.V., Solovev A.G.
Investigation of the causes of destruction of heat-resistant molded pallets
Shaburova N.A., Shevchenko A.A.
Shear deformation by torsion, upsetting and press forming method
Volkov A.E.
Comparison of methods of stress-strain state estimation in the upset of a cylindrical workpiece
Strugov S.S., Ivanov V.A., Sherkunov V.G.
Resource-saving technologies of forming process for casting superalloys
Znamenskii L.G., Ivochkina O.V., Varlamov A.S., Yuzhakova A.A.
The influence of plasma-arc cutting on the microstructure and hardness of high-strength steel
Chukin M.V., Poletskov P.P., Alekseev D.Yu., Berezhnaya G.A., Gushchina M.S.
Exothermic heating-up of the heads in the lost foam casting
Kulakov B.A., Dubrovin V.K., Karpinskiy A.V., Karkarin A.M.
Domestic paints for lost foam casting
Znamenskii L.G., Ivochkina O.V., Varlamov A.S., Franchuk A.N., Yuzhakova A.A.
Recrystallization features of deformable aluminium-magnesium alloys with scandium
Koryagin Yu.D., Ilin S.I.
Experimental study of frictional forces at the boundary between tool and workpiece during expansion of large diameter pipes
Ilichev V.G., Zalavin Ya.E.
Porous material deformability in four-roll pass rolling
Barkov L.A., Kamenshchikov Yu.I., Samodurova M.N., Latfulina Yu.S.
Mathematical description of pressing process of workpieces of abrasive tools on ceramic bond
Osintsev A.A., Samodurova M.N.
Present issues of technology and economical efficiency of production of billets from nanostructured materials
Goryacheva O.E., Goryachev E.A.
Influence of ultrasonic treatment on the viscosity of aqueous-clay suspensions for sand-clay mixtures
Antoshkina E.G., Smolko V.A.
Analysis of technical requirements for nanostructured steel plates resistant to ultra-low temperatures
Chukin M.V., Poletskov P.P., Nabatchikov D.G., Emaleeva D.G., Gushchina M.S., Kuznetsova A.S.
Analysis of the quality indicators of 40S2A grade steel in the processes of production of bent springs
Mezin I.Yu., Gun I.G., Chukin V.V., Mikhailovskiy I.A., Kasatkina E.G., Limarev A.S.
Technological features of production of pipes from titanic alloys
Filyaeva E.A., Kosmatski Ya.I.
Mathematical modelling of the processes of vibrational pipe pressing
Rakhmanov S.R.
Synergetic concept of metal coatings formation by plasma-cavitating method and their properties
Steblyanko V.L., Chukin M.V., Platov S.I., Ponomarev A.P.
QR code for installing the SciUp app Point your camera and download the free app SciUp