Page 40. Mechanical technology in general: processes, tools, machines, equipment UDC: 621.7

Increase of operational reliability of inductor systems during magnetic and pulsed processing with press tool

Palamarchuk Y.E.

Development of the unit for obtaining the powders from conductive materials

Ageev E.V., Semenihin B.A., Latypov R.A., Bobryshev R.V.

Research of the unit electric parameters influence on the powder formation process at electroerosive dispersion of hard alloy scraps

Ageev E.V., Semenihin B.A., Latypov R.A.

Modelling of heating the system "coating-base" at plasma powder weld deposit Stellite 190 by scanning arch

Zhatkin S.S., Nikitin V.I., Parkin A.A.

Prospects of application the diamond ruling tools at the enterprises of machine-building structure

Shaposhnikov S.D.

Physical principles of diagnostics in technologies of the plasma spraying

Gulyaev P.Yu., Dolmatov A.V.

Reception of nanopowder on the basis of tungsten-carbide and its application for restoration and hardening the machine details

Ageev E.V., Semenihin B.A., Latypov R.A.

Effect of heat-affected zone microstructure and alloyage line of welded joint in low-alloy steel on the delayed destruction

Argunova A.A., Semyonov Ya.S., Myreev N.V., Gabysheva T.A.

Application of materials with shape memory effect for increasing durabiliry of thin-walled pressure vessels

Blednova Z.M., Myshevsky I.S.

Dependence of the surface roughness of small apertures on type of the working environment and modes of electroerosive processing

Blinova T.A., Pogonin A.A., Boyko A.F.

Abrasive wearability of the coverages plotted by the method of high-speed gas-flame spraying

Vopneruk A.A., Valiev R.M., Vedishchev Yu.G., Shak A.V., Kuptsov S.G., Fominyh M.V., Muhinov D.V., Ivanov A.V.

Technological providing the accuracy of contact surface form of electric motor collector

Duyun T.A.

Application of nanostructured coverings in sliding bases of drilling bits

Ibatullin I.D., Nenashev M.V., Ganigin S.Yu., Chebotaev A.S., Yakunin K.P., Shashkina T.A., Gallyamov A.R., Belokorovkin S.A.

About one method of decreasing the spalling wear in friction pairs, working at low climatic temperatures

Lebedev M.P., Semyonov Ya.S., Portnyagin S.P., Savinova A.V.

Hard alloy on the basis of tungsten carbide with ionic-plasma TiZrN coating

Oskolkova T.N.

Influence of chemical and physical heterogeneity of the ingot in weight 24,2 t from steel 38ХН3МФА on mechanical properties of tubular billets

Rutskiy D.V., Zyuban N.A., Gamanyuk S.B., Poslamovskaya Yu.A.

The slowed down destruction and parameters of the estimation of technological strength of welded connections from high-strength steels, working at low temperatures

Sivtsev M.N., Sleptsov G.N.

The complex approach to the estimation of working capacity of power equipment elements

Smirnov A.N., Ababkov N.V.

Research of metal structurally-phase condition as the parameter of processable surfaces of machines details quality

Smirnov A.N., Koneva N.A., Popova N.A., Glinka A.S.

The increase of amg6 alluminium alloy plasticity by laser radiation action

Murzin S.P., Tregub V.I., Osetrov E.L., Tregub N.V., Malov S.A., Nikiforov A.M.

Analysis of plastic deformation on the surface in the process of ultrasonic diamond burnishing

Malyshev V.I., Selivanov A.S.

Synthesis of metal by pelletized termite mixture combustion

Yatsenko V.V., Samboruk A.R., Amosov A.P.

Influence of thermoplastic hardening on the microstructure of heat resisting and titanic alloys

Vishnyakov M.A., Bogdanovich V.I., Prokopovich K.V., Gromova E.G.

Experimental researches of rolling out, rolling out with burring and forced thinning processes at thick-walled preform

Zvonov S.Yu., Belyanin V.P., Bolotov M.A., Popov I.P.

The object-oriented approach and its computer implementation in problems of the machines dynamic analysis

Telegin V.V.

The analysis of influence on dynamics of crank press of technological schemes of press forming

Telegin V.V., Abdullah M.N.

Influence of chrome on morphology of carbide particles in converted steels and in iron-chrome electrolytic coverings

Salnikov V.G., Gadalov V.N., Kolmykov D.V., Romanenko A.G., Romanenko D.N., Lyahov A.V.

Engineering of the surface layer and technological heredity

Usoltseva I.I.

Research of matrix properties for polymeric composite materials

Yushkova N.A., Bastrakov V.M., Zabrodin A.G.

Technique and results of experimental researches the process of ultrasonic press fitting dents from cone roll bits with use of scientific researches automated system

Batishcheva O.M., Shuvaev V.G., Papshev V.A., Ankudinov D.V.

Influence of geometry and conditions of hardening of quiet steel ingots on quality of turbogenerator rotor forgings

Zyuban N.A., Rutskiy D.V., Gamanyuk S.B., Titov K.E., Poslamovskaya Yu.M., Vitryak N.S., Konovalov S.S.

Increase in operation period of the oil-field equipment at the expense of replacement the material of details

Kolenchin N.F., Kuskov V.N.

Research the structure and properties of metal at high pressure boilers drum after repair building-up welding

Smirnov A.N., Kozlov E.V., Koneva N.A., Popova N.A., Ababkov N.V., Knyazkov V.L.

Research the rational conditions of ring formation from the metal strip

Anichkin A.N., Korolyev А.V.

Two-level optimization of pilger rolling mill parameters

Lehov O.S., Raskatov E.Yu.

New manufacturing technologies of steel piston rings

Okolovich G.A., Okolovich A.G.

Research the dynamics of barrel capture by pilger mill rolls

Raskatov E.Yu.

Analysis of power interaction between the cast detail and the mould

Savinov A.S., Sinitskiy E.V., Tuboltseva A.S.

Structural phase condition and acoustic characteristics of surface layer after various modes of processing at draft and finishing stages of product manufacturing

Smirnov A.N., Koneva N.A., Ryabov S.A., Glinka A.S.

Research of electronic beam irradiation impulse duration on metal-ceramic plates durability

Ovcharenko V.E., Mokhovikov A.A.

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles