Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Settlement-experimental estimation of safety factors in designs with a developing fatigue crack
Sigova E.M., Doronin S.V.
Superdispersed aluminum as high-energy fuel
Krushenko G.G.
Experimental research of the relation between X-ray radiation and electron beam position relative to the joint during the electron beam welding
Braverman V.Ya., Belozertsev V.S., Rozanov O.V.
Formalized method of assembly datum surf aces selection and analysis in aircraft construction
Ahatov R. Kh., Odnokurtsev K.A.
Foundation of the linear expansion coefficient of aluminum-silicon alloys
Krushenko G.G.
Investigation of the structure and properties of the die tool steel
Bogdanova T.A., Pereboeva A.A., Tretyakova L.P., Okladnikova N.V.
Investigation of heat exchange effection on the specific outlay when electro contact metal cutting
Veretnova T.A., Shestakov I. Ya., Cukanov A.V., Kovaleva A.A., Remizov I.A.
Mathematical models for the process of changing the X-ray radiation from the beam position relatively the seam during the electron beam welding)
Braverman V. y A., B Elozertsev V.S., Goryashin N.N., Lelekov A.T.
Management problems of basic production assets reproduction at the machine-building enterprises
Boiko A.A., Bahmareva N.V.
Instrumental error of relative measurements
Garin E.N.
The determination of relative coordinates based on the retransmission of navigation signals of the GLONASS and GPS systems
Garin Е.N.
Product characteristics forecasting model with support vector machines
Kovalev I.V., Y Urkov N.S.
Experimental determination factor to viscosity, elasticity and plasticity media for abrasive flow machining process
Snetkov P.A., Levko V.A., Pshenko E.B., Lubnin M.A.
Analysis of X-ray radiation dependence on melting channel position relatively to joint under the electron beam welding process
Braverman V.Ya., Belozertsev V.S.
The influence of conditions for passing GLONASS and GPS satellite radio navigation signals on the errors of defining relative coordinates
Garin E.N.
Surface laser microprofiling
Verkhogliad A.G., Stupak M.F., Chugui Yu. V.
Dependence of X-ray radiation from beam position against joint with different focusing degree in the process of electron beam welding
Braverman V. Ya., Belozertsev V.S.
Technological features of manufacturing band-pass filters working in UHF-, EHF-ranges
Oborina L.I., Romanov A.E., Ismaylov B.K., Sterehov I.V., Trifanov I.V.
Investigation of weld-deposition by means of independent three-phase arc surfacing with consumable electrodes technological opportunities
Bezrukih A.A., Meister R.A., Lubnin M.A., Gotovko S.A.
Manufacturing technique of fibrous structure wire from the facing of aluminium-magnesium-silicon alloy
Zagirov N.N., Kovalyova A.A., Ivanov E.V.
Researches of hybrid technology
Gerukov A. Sh., Bogdanov V.V., Nazarov S.V.
Technological maintenance of quality in manufacture of multichannel wave guides of EHF-range
Oborina L. l, Ismaylov B.N., Sterehov I.V., Trifanov I.V.
Automatic system of induction on joint for electron beam welding
Tikhonenko D.V., Murygin A.V.
Mathematical modeling of high-voltage accelerating power supply for electron-beam welding based on parallel resonant converter with zero voltage switching
Sukovatenko S.V., Goryashin N.N., Laptenok V.D.
About influence of the structural condition of 32 NKD on temperature factor of linear expansion of pipes of wave guides
Oborina L.I., Biront V.S., Blokhin I.V., Trifanov I.V., Ismaylov B.N.
Comparative analysis of different ways surfacing with consumable electrodes for stainless steels welding
Bezrukih A.A., Meister R.A., Lubnin M.A., Gotovko S.A.
Mathematical model of contact resistance of cold contact at spot welding
Mishurenko A.B., Kozlovsky S.N.
The enhancement of productive efficiency of the press-articles from aluminum alloys on the operation base of thermal conditions of the extrusion
Belyaev S.V., Gubanov I.Yu., Shirokov P.O., Salatov A.V., Maslov I.Yu.
Control of melting depth by X-ray radiation during electron-beam welding
Braverman V.Ya., Belozertsev V.S., Veisver T.G.
Application of resource-saving technology of copper and copper alloys metallurgical recycling for contact welding electrodes production
Busigin S.L., Rukosuev A.P., Krushatina S.K., Demchenko A.I., Rafalsky A.S.
Interaction of composite components of gallium pastes-solders
Temnykh V.I., Kazakov V.S., Temnykh E.V., Zeer G.M., Abkaryan A.K., Rastovtsev P.A., Potekhina E.A.
Features of simulation of process of semicontinuous extrusion of aluminum alloys
Gubanov I.Yu., Belyaev S.V., Shirokov P.O., Salatov A.V., Maslov I.Yu.
Technology of producing fibrous structure wire from chips of aluminum–magnesium–silicon alloys
Zagirov N.N., Kovalyova A.A., Ivanov E.V.
The dependence analysis of durability, the catastrophe risk and the transport effectiveness on the airplane construction mass
Boyko O.G.
Investigation of surfacing technological opportunities by the indirect three-phase arc with consumable electrodes
Bezrukih A.A., Meister R.A., Lubnin M.A., Gotovko S.A.
Researches of hybrid technology of the noncontact acoustic control
Geryukov A. Sh., Bogdanov V.V., Nazarov S.V.
Mathematical model for contact resistance of cold contact at spot welding
Mishurenko A.B., Kozlovsky S.N.
Prospective composite materials based on ultrahigh molecular weight polyethylene modified with ultrafine powders of aluminum oxide
Gordeev Y.I., Abkaryan А.К., Kovalevskaya O.V.
Technology of production of aluminum composite with high concentration of reinforce nanopowders
Krushenko G.G., Filkov M.N.
Evaluation of burning arc stability on small currents
Meister R.A., Lubnin M.A., Gotovko S.A., Meister A.R., Grigoryew A.N.
QR code for installing the SciUp app Point your camera and download the free app SciUp