Scientific articles \ Applied sciences. Medicine. Technology \ Engineering. Technology in general \ Mechanical engineering in general. Nuclear technology. Electrical engineering. Machinery

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles

In section "Mechanical technology in general: processes, tools, machines, equipment"
Analysis of temperature field calculation methods for a metal plate during surface laser hardening
Yachikov I.M., Shatalov E.A.
Reducing diameter variability when expanding large-diameter pipes
Batalov G.S., Tomilina N.S., Zhigunov K.L.
Development and improvement of equipment for a radial forging technological line using the SKK-14 RKM
Zakarlyukin S.I., Koval G.I., Zakarlyukina E.A.
Mathematical model of the deformation site during cold asymmetrical rolling of bimetallic strips
Gorbunova V.S., Vydrin A.V., Pellenen A.P.
Technological aspects of rolling the thinnest strips from titanium nickelide
Tatarnikov N.N., Yusupov V.S., Belelyubsky B.F.
Mechanical and tribological properties of compacts obtained by pulse pressing from a mixture of iron micropowder and molybdenum nanopowder
Rusin Е.Е., Razov Е.N.
Investigation of the effect of heat treatment mode on the microstructure and hardness of pipes made of chrome-nickelmolybdenum steel with high-resistant austenite
Chubukov M.Yu., Guseva A.A., Myakotina I.V., Korotkova A.I.
Refinement of thermokinetic diagrams decomposition of austenite steel grades 70–80
Moller A.B., Nazarov D.A., Baranov N.A., Savva A.D.
Simulation of the process of rolling casings in a longitudinal rolling mill with a short mandrel to determine the influence of the thickness of the casing on the process of rolling
Nifantev P.N., Farukshin I.K., Chernykh I.N.
The effect of the speed of movement of the laser cutting head during processing of the 12X18H10T alloy on the quality of the resulting surface
Kapalin N.Yu., Berdnikov O.O., Rechenko D.S., Lopatin B.A.
Preparation of Electrode Materials from Powders Obtained by Electroerosion Dispersion
Zaitsev D.V., Sunin D.P., Akishin R.V., Gerasimov M.A., Sergunov D.A.
Dynamic behaviour research of the space craft structure at vibroacoustic loading
Pugach A.V., Solovjeva T.I., Shatrov A.K.
Experimental research geometrical parameters of electron beam
Bocharov A.N., Murygin A.V.
Experimental research of X-ray radiation during electron beam welding
Braverman V. Ja., Belozertsev V.S., Uspenskij A.N.
Some aspects of the increase of the stability of the process of point welding against education of the splaning
Jashemrtov S. N. Kozlovsky E. G.
Hardening of metal surfaces by electrical arc
Mikheev A.E., Girn A.V., Ivasev S.S., Karpov R.V.
Joint coordinate determination for electron-beam welding using sensor information parameters
Murygin A.V., Balajtisov S.V.
Research of the process of the honing stoking up pinelines for aircraft
Sysoev A.S., Sysoev S.K., Levko V.A., Snetkov P.A., Zverintseva L.V.
The defining of width energy distribution density in section of electron beam
Bocharov A.N., Murygin A.V.
The sizing of melt variation and sensitivity at contact method of monocrystal growth by Czochralsky method
Sakhansky S.P.
Modeling ways for calculating energy-power parameters asymmetrical process of the integrated rolling-pressing
Dovzhenko I.N., Dovzhenko N.N., Sidelnikov S.B.
Inaccuracy positioning determination for joint of welding details on basis of regularity analysis for joint counts density
Murygin A.V., Balaytisov S.V.
Definition of mass energy capacity of a flywheel with the hyperbole profile
Lopatin A.V., Makarov I.V., Rutkovskaya M.A.
The analysis reliability of a signal of the joint sensor by the form of a signal at electron beam welding
Murygin A.V., Tikhonenko D.V.
The installation of electroprocessing with the linear electrodynamic engine
Stryuk A.I., Shestakov I. Ya.
The usage of granular wastes of aluminium alloys for producing of small section rods and wires
Zagirov N.N., Yurikov A.S.
Designing of new technologies for combined processing of the aluminium-silicon alloys
Sidelnikov S.B., Dovzhenko N.N., Gorbunov Ju. A., Gorbunov D.Y., Lopatina E.S., Sokolov R.E.
Designing of tool and technology for producing hollow welded structures by combined methods
Sidelnikov S.B., Dovzhenko N.N., Sokolov R.E., Petshansky A.S., Pletykhin S.A.
Technological quality maintenance of manufacturing of deep apertures in channels of small section
Trifanow L.V., Oborina L.I., Trifanow V.I., Gaidenok N.D., Terehow V.I.
Mathematical modelling of the temperature field at contact spot welding
Kozlovsky S.N.
The device for contact spot welding with reduction of the peripheral zone of connection
Kozlovsky S.N., Yashmetov E.G.
Engineering of the surface of machine details
Amelchenko N.A., Anistratenko N.E., Dobrynina L.S., Mikhailov S.V., Balashov О.Е.
Techniques of settlement definition of the nucleus sizes and average values of temperature in the zone of contact spot welding
Kozlovsky S. n
Interaction of an abrasive grain with a processable surface at exstradhoun
Sysoyev A.S., Sysoyev S.K., Zverintseva L.V., Alikin A.S.
Research of interreactions characteristics of core-inginery and feedstock to fabricate canals of light section
Trifanov I.V., Oborina L.I., Trifanov V.I., Sterehov I.V.
Device for monitoring the seam of welded parts with a magnetic field sensor
Braverman V. Ya., Belozertcev V.S.
The development of the technology of the annealing casting made of aluminium-silicon system
Okladnikova N.V., Rovensky G.V., Diener D.A., Oryolkina T.A., Pereboyeva A.A.
The use of nanotechnologies for the increasing the physical-mechanical characteristics of metal fabrics surfaces
Krushenko G.G., Reshetnikova S.N.
Decelerating X-ray radiation during electron beam welding and its interrelation with the process parameters
Braverman V. Ya.
Computational research of influence operating conditions on heat interchange in aluminium electrolyzer
Skuratov A.P., Pyanykh A.A.
QR code for installing the SciUp app Point your camera and download the free app SciUp