Page 33. Mechanical technology in general: processes, tools, machines, equipment UDC: 621.7

Reasons and kinds of marriage depending on the formation of the stress-deformed condition and evaluating the probability of destruction of the cross-border on the criteria of Cockroft-Letem in the process of cold volume stamping combined by the method of pressing-expansion

Strugov S.S., Ivanov V.A., Smyrnykh A.V., Tarkalenko M.D.

Effect of the properties of glass-lubricants on the process of pressing pipes from stainless steel 08Cr18Ni10Ti

Kuznetcov V.I., Vydrin A.V., Korol A.V., Pashnina E.Yu., Zhukov A.S., Zubkov A.M.

Mathematical modeling of high-energy pressing process of graphite-plastic composition

Samodurova M.N., Ogarkov N.N., Platov S.I.

How ultrafine particles of tungsten monocarbide affect the welded-metal structure

Sheksheyev M.A., Mikhaylitsyn S.V., Sychkov A.B., Emelyushin A.N., Shiryayeva E.N.

Technology behind improving the platinite quality

Kasatkina E.G., Mezin I.Yu., Gun I.G., Limarev A.S., Mikhailovsky I.A., Kramzina L.V.

Determination of the distribution of a temperature field in the involvement of a steel wire in order to ensure the working capacity and improve the durability of the roller die

Avramenko A.A., Strugov S.S.

Determination of the range of variation of the parameters of the stress-strain state of the metal during continuous pipe rolling

Al-khuzaie A.S.O., Shirokov V.V., Vydrin A.V.

Dynamic features of functioning of the plug mill of the pipe-rolled unit

Rakhmanov S.R.

Determination of the causes of low shock viscosity of ring weld

Shevchenko A.A., Semenova E.S., Shaburova N.A.

Theoretical bases of increasing the spatial geometric accuracy of cast colded GTE blades

Gayntseva E.S., Gorukhin A.S., Ganiev R.R., Demenok O.B., Kulakov B.A.

About using unsymmetric rolling for the production of strips and bars

Pellenen A.P.

Deformation and kinematic parameters of roll forming

Vydrin A.V., Zalavin Ya.E.

Mathematical modeling of the strength of the stud connection of assembly plates of the crystallizer of CCM

Yachikov I.M., Panferov V.I., Feoktistov N.A., Chernov V.P.

Reducing-atmosphere thermochemical reactor with partial oxidation of methane steam reforming products

Dubinin A.M., Cherepanova E.V., Tuponogov V.G., Gritsuk S.A., Emelyanova A.A.

Calculation of residual stresses from burnishing taking repeated deformations into account

Mazein P.G., Tokarev A.E.

Use of secondary polystyrene as the material component for production of models under LFC

Issagulov A.Z., Kovalyova T.V., Kvon Sv.S., Kulikov V.Yu., Chsherbakova E.P.

Research of power parameters of the low-waste draftless hot die forging process on the basis of the combined strain pattern of "expansion-extrusion"

Ivanov V.A., Strugov S.S., Avramenko A.A., Tarkalenko M.D.

Changing the microhardness of absolute solid alloys with their irradiation of a gas-metallic beak of argon and zirconium ions

Akimov V.V., Mishurov A.F., Negrov D.A., Sidorova Ya.A., Putintsev V.Yu.

Study of surface defect transformations during pipe manufacturing using PRP-80

Chernykh I.N., Ustyantsev V.L., Litvinov M.A., Krivonogov I.N.

Development of new methods of manufacturing of large-diameter double-seam pipes

Batalov G.S., Lunev A.A., Radionova L.V.

Physical modeling of geometric and force parameters of the continuous longitudinal rolling of tubes without a mandrel

Bunyashin M.V., Vydrin A.V., Barichko B.V., Kochkin A.S., Khramkov E.V.

Simulation of plastic deformations in metal rolling

Barkov L.A., Kamenshchikov Yu.I., Samodurova M.N., Latfulina Yu.S.

Application of the energy-static method for determining the forces and torques acting on the tool when two-roll helical piercing with drive guide wheels

Korol A.V., Muntin A.V., Kavitsyan L.M.

Computational simulation of continuous pipe rolling on a FQM mill in the Deform-3D program

Toporov V.A., Ibragimov P.A., Panasenko O.A., Khalezov A.O., Nukhov D.Sh.

Inhomogeneity of deformation during lengthwise rolling of tubes

Pavlov D.A., Erpalov M.V.

Industrial application and development of steep rolling

Koval G.I.

Retention of the section border form when upsetting of bimetallic article

Loginov Yu.N., Zamaraeva Yu.V.

Influence of the conditions of the continuous capture of the sleeves on the technological parameters of the process

Al-jumaili M.J.M., Vydrin A.V., Shkuratov E.A.

Energetical theory of metal processing as the basis of the calculating resource-saving sequences method of wire-drawing

Radionova L.V., Lisovskiy R.A., Bryk A.V., Lezin V.D.

Research of plastic resistance of steel 32CrMn

Al-khuzai A.S.O., Shirokov V.V., Vydrin A.V.

Numerical analisys of aluminium alloy 5754 profile rolling on radial-dispacement rolling mill

Kuakowska A., Laber K., Dyja H., Gryc A., Bakhaev K.V., Polunin D.S.

To the definition of thermophysical properties alloy Ti-10V-2Fe-3Al at VAR

Kondrashov E.N., Rusakov K.A., Leder M.O., Kulikov D.S.

Mathematical modeling of direct extrusion power parameters of low-melting materials

Radionova L.V., Faizov S.R., Lezin V.D., Sarafanov A.E.

Substantiation of corrective actions for compensation of descending carbon in steel during manufacture the cold-rolled flat products for forming

Zavalishchin A.N., Tulupov O.N., Rumyantsev M.I., Moller A.B., Papshev A.A., Chumarin D.R.

Asymmetric rolling of sheets and strips: history and development prospects

Pesin A.M., Pustovoytov D.O., Biryukova O.D., Kozhemyakina A.E.

Calculation of the parameters of the roll forming with the purpose of minimizing the uniformity of deformation in the cross section

Zalavin Ya.E.

Estimation of the accuracy of the formation of the ends of pipes during calibration

Akhmerov D.A., Zvonarev D.Yu., Vydrin A.V., Zinchenko M.A., Pavlova M.A.

Improvement of the technology for the production of high-quality thick-plate products from microalloyed pipe steels based on the application of the effective technological compensation methodology

Chikishev D.N.

Optimization of the wire extrusion process from 52In-48Sn alloy by the generalized reduced gradient method

Radionova L.V., Faizov S.R., Erdakov I.N., Bryk A.V.

By hydrogen reduction from a-FeOOH hydroxide compound under isothermal conditions

Tien Hiep Nguyen, Nguyen Van Minh, Tang Viet Phuong, Tang Xuan Duong, Le Hong Quan

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles