Page 34. Mechanical technology in general: processes, tools, machines, equipment UDC: 621.7

Modelling of hot deformation of steel 08H18N10T (AISI 321) under uniaxial compression test

Rushchits S.V., Akhmedyanov A.M., Perevozchikov D.V., Makovetskiy A.N., Eremin V.N.

Lubricanting & deoxidizing materials and equipment for their injection in pipe-rolling plant equipped with continuous mills

Kuznetsov V.I., Krasikov A.V., Vydrin A.V., Pashnina E.Yu., Sokolov D.K., Zhukov A.S.

Study of the minimum strip thickness for non-symmetric rolling

Pellenen A.P.

Formation of the structure of steel 08KH18N10t during pilgrim rolling and following annealing

Eremin V.N., Perevozchikov D.V., Makovetskiy A.N., Shakirova L.I., Rushchits S.V.

Improving the quality of tension regulation in the strip of the continuous hot galvanizing unit

Kornilov G.P., Abdulveleev I.R., Shokhin V.V., Khramshin T.R., Nikolaev A.A.

Research of the microstructure features of rolled specimens made of 08YUR steel with an estimate of its effect on hydrogen accumulating for determining the “fish scale” defect tendency which is formed on enameled rolled products

Chikishev D.N., Golubchik E.M., Avramenko A.A., Nikitenko O.A., Potapcev D.M., Fomin M.Yu., Strugov S.S.

Influence of die profile on the character of stress-deformed state during extruding of pipes

Vydrin A.V., Zhukov A.S., Tumashev A.S., Zvonarev D.Yu., Pavlova M.A.

Friction coefficient in the process of direct extrusion of wire and bar solder from 52In-48Sn alloy

Radionova L.V., Faizov S.R., Gromov D.V., Erdakov I.N., Siverin O.O.

Micromechanical model of representative volume of powders material

Ivanov V.A.

Technological improvement of rod punching tools manufacturing

Stepanov V.Е., Mozgovoy N.I.

Study of wear resistance of coatings obtained by the combined method

Kuznetsov Yu.A., Prokhorov D.G.

Estimation of the elasticity modulus of composite electroplated coatings during their layer-by-layer deposition

Zhachkin Sergey Yu., Zavrazhnov Anatoliy I., Penkov Nikita A., Martynov Alexei V., Zadorozhny Roman N.

Roller drawing application for production of simple and shaped profiles from hard-to-form alloys

Radionova L.V., Sarafanov A.E.

QFORM-based research how the accuracy settings of piercing mill centering units axis influences hollow shell thickness

Pavlova M.A., Zvonarev D.Yu., Akhmerov D.A., Zinchenko M.A.

Analysis of the influence of setting parameters washing machine on the change of case wall diameter and thickness

Vydrin Aleksandr V., Neroznikov Vladimir L., Zvonarev Dmitriy Yu., Trubnikov Kirill V.

Interaction of chemically active melts with ceramic mold materials in vacuum

Znamenskii L.G., Ivochkina O.V., Solodyankin A.A.

Study of expander segment wear for calibrating large diameter pipes

Batalov G.S., Radionova L.V., Shander S.V.

Development of a device for controlling the injected mass of the lubricant and deoxidizing material

Kuznetsov V.I., Sokolov D.K., Krivosheev A.A., Pashnina E.Yu., Gladkikh V.S., Panasenko O.A., Neroznikov V.L., Krasikov A.V.

Reduction of specific downtime of logging equipment in maintenance and repair

Bukreev Vadim Yurievich, Kozlov Vyacheslav Gennadievich, Skrypnikov Alexey Vasilievich, Manukovsky Andrey Yu.

Ensuring uniform mechanical properties of wire rod 5.5-6.5 mm from steel grades 70-75

Moller A.B., Levandovsky S.A., Nazarov D.A., Baranov Sn.A., Ishmetiev Nm.E.

A study of the impact of technological parameters on deformation speed at high speed wire drawing in monolith wires

Radionova L.V.

Ways to increase the operational characteristics of the mandrels of plug of piercing mill

Shamilov A.R., Korol A.V., Goncharuk A.V.

The influence of the degree of mechanical heterogeneity on the strength of t-shaped welded joints

Aymetov S.F., Aymetov F.G.

Evaluation of the effect of axial adjustment on the strength of the rolling mill mandrels

Bilan I.T., Trubnikov K.V., Zvonarev D.Yu., Noskova M.N.

Development of the section for heating blanks from special steels and alloys

Zakarlyukin S.I., Koval G.I.

A simple analytical model of thermal fields to develop digital twins in industrial arc welding

Mirzaev D.A., Okishev K.Yu., Mirzoev A.A.

Stress-strain state of a gear from high-strength cast iron with diffusion carbide coating

Veselovsky A.A., Troyanovskaya I.P., Erofeev V.V.

Physical and computer modeling of the shape of the rear end sections of pipes

Akhmerov D.A., Vydrin A.V., Novikov T.O., Israfilova E.Sh., Geym E.A.

Calculated and experimental determination of energy-power parameters in wire drawing in monolithic dies

Radionova L.V., Gromov D.V., Lisovskiy R.A., Faizov S.R., Glebov L.A., Bykov V.A.

Analysis of the existing and development of a new design of partitions for a four-strand continuous casting machine

Tochilkin V.V., Yachikov I.M., Eremin A.N., Podosuan G.A., Matsko E.Yu.

Detection and classification of defects of rolling origin on the ends of sleeve using a convolutional neural network

Bilan I.T., Trubnikov K.V., Zvonarev D.Yu., Noskova M.N.

Reasons for the formation and methods to eliminate air bubbles on the surface of solder rod produced by direct extrusion

Faizov S.R., Radionova L.V.

Macro- and microstructure of lignosulfonates depending on the base of cooking acid

Firstov A.P.

Influence of different types of polymer packagings on the storage of avocado fruits during their sales in the retail trade network

Karpova N.A., Sokolova L.M., Kulishov V.N., Tkachenko G.V., Maslovsky S.A.

Basics of the technology of rolling commercial pipes of special purpose from hard to deform steel grades on units with continuous mills with a controlled-movable mandrel

Krasikov A.V.

Physical simulation when students study theories and technologies of rolling

Radionova L.V., Lisovsky R.A., Gromov D.V., Faizov S.R., Glebov L.A., Bykov V.A., Sosedkova M.A.

Simulation mathematical model of the rolling process on a continuous sheet mill

Vydrin A.V., Shirokov V.V., Sosedkova M.A.

Analysis and study of geometric tool parameters with purpose increasing the quality of forgings during forging bodies of brass cranes

Levin D.O., Ivanov V.A., Usov D.A., Strugov S.S.

Comprehensive study of the process of pipe end calibration using QFORM

Akhmerov D.A., Zvonarev D.Yu., Motyakov S.Yu., Ulyanov A.G.

Simulation of technology for manufacturing parts by broach through a horn-shaped core

Shirokov V.V., Kuvaev D.S.

Mechanical technology in general: processes, tools, machines, equipment - 621.7

Scientific articles